Shandong Farin International Trade Co., ltd.
Product Series
YQJ200-Hydraulic angle notching machine
YQJ200 Hydraulic angle notching machine is mainly used to cut the corners of angle steel. It is driven by hydraulic pressure, with simple and convenient operation, fast cutting speed and high processing efficiency.
Category:
Keywords:
Main application:
YQJ200 Hydraulic angle steel notching machine is mainly used to cut the corners of angle steel. It is driven by hydraulic pressure, with simple and convenient operation, fast cutting speed and high processing efficiency.
The main technical parameters:
(1) Nominal force: 1000kN
(2) Rated pressure of hydraulic system: 20 MPa
(3) Number of idling runs: 16 times/min
(4) Maximum shear angle steel:
Shearing by angle ( ∕ ): 200x200x20(16Mn, σb≈600MPa)
Shearing angle: 15°～ 60° rotation by electrical.
Shearing by right angle (∟) : 200x200x20(Q235-A, σb≈410MPa)
160x160x16(16Mn, σb≈600MPa)
(5) Motor power of hydraulic station: 15kW
(6) Ambient temperature: 0℃～40℃
(7) Dimension:
(8) Weight of machine: 8000KG
The main structure:
The main body is welded by two 80mm thick steel plates, and the rigidity is very good. The fuselage is "C"-shapes, the upper part is a hydraulic master cylinder with a cylinder diameter of 220mm, and the lower part is a worktable, which is equipped with a mold part;
The mold part is guided by four guide columns; the upper blade seat is supported by springs and has a reset function; two blades It is installed vertically and has a certain shearing angle relative to the plane of the worktable. The lower blade has an oblong hole, which is convenient to adjust the gap between the upper and lower blades to adapt to shearing angle steel of different thicknesses.
The main drive system of the mold part adopts a worm gear and worm, and the worm can be gently shaken to make the table rotate, so that the shearing angle can be adjusted conveniently.
FAQ
Which countries do you mainly export to?
Southeast Asia: Vietnam, Laos, Cambodia.
Africa: Rwanda, Tanzania, Mozambique, Mauritania, Sierra Leone, Guinea, Nigeria.
What is the lead time for mass production?
Typically 15 to 30 days, depending on the quantity and items.
What are your payment terms?
We accept credit cards, wire transfers, and letters of credit.
What is your delivery deadline?
EXW, FOB, CIF, and so on. Other delivery terms are negotiable.
Which transportation methods can I choose?
We typically provide customers with FOB prices in U.S. dollars. Upon customer request, we can also offer door-to-door delivery (shipped to your store address) or CIF prices. The port of shipment is Qingdao, which is a few hours’ drive from our factory.
Product Center