Shandong Farin International Trade Co., ltd.
Product Series
PVC PP PE Soft Curtain Sheet Extrusion Line
it's used for produce the PE PP PVC sheet.
Category:
Keywords:
PVC PP PE Soft Curtain Sheet Extrusion Line
PE/PP sheet has the characteristics of non-toxic, flame resistance,flexibility,good tensile and abrasion resistance. It is being widely used in the medical industry,food industry,chemical industry,clothing industry,packaging industry,electronics industry and so on.
PE/PP sheet has the features of high impact, heat resistance, non-toxic, smooth surface, corrosion resistance, excellent electrical insulation performance and so on. It is being widely used in environmental protection industry, food industry,chemical industry,electric power industry and other industries.
PE/PP Board/sheet Size
Thickness: 0.5-30mm
Max width: 3000mm (sheet can be wound.)
Product description:
1. Applied Resin: PU granule：PVC
2. Product: PU soft tube：PVC soft curtain sheet
3. Specification: 400*1-5mm (width*thickness)
Environmental conditions
1、Location: Indoor
2、Power source: No dangerous area
3、Humidity level: 85%, non-condensing
4、Temperature: 0-40℃
5、Protection mode: Earth
6、Power Voltage: 385V 50Hz three phase, four line
7、Total Power: 120KW about
Conditions of usage:
1、Power source: three-phase, four-wire, 380V, 50HZ
2、Circulating water: ≤20℃, ≥0.3Mpa, 2-4m³/h
3、Compressed air: ＞0.5MPa, 0.4m³/min.
4、Installed gross power: about 120KW
5、Power consumption: about 45-50KW/h
6、Central height of the extruder: 1000mm
7、Equipment installed dimension（L×W×H）: 12000mm×900mm×3000mm
8、Direction of the operation: from right to left
Equipment list:
|
No |
Item |
Quantity (set) |
|
1 |
Auto feeder and dryer |
1 |
|
2 |
SJ-75/35 Single Screw Extruder 75/28 |
1 |
|
3 |
Extrusion mould |
1 |
|
4 |
Three rollers calender |
1 |
|
5 |
Mould temperature controller |
1 |
|
6 |
cooing bracket and Edge Cutting Unit |
1 |
|
7 |
Haul off machine |
1 |
|
8 |
Double working position winder |
|
Technology Parameter:
1. Automatic feeding machineJL100
|
Deliverability |
300 kg/h |
|
Delivery Distance |
4 m |
|
Volume |
100L |
|
Air Pump Power |
2kw |
2. Single-screw Extruder SJ75/28
|
1）Model |
SJ75/28 |
|
—— Capacity |
140-200kg/h（PVC） |
|
—— Central height |
1000mm |
|
2）、Screw |
|
|
— diameter |
75mm |
|
— Material |
38CrMoAlA |
|
— Surface treatment |
Nitriding, Depth 0.50~0.70mm |
|
3)、Barrel |
|
|
——Material |
38CrMoAlA |
|
——Inner surface treatment |
Nitriding, Depth 0.50~0.70mm, Honing |
|
——Heating zones |
4 |
|
——Heating method |
cast aluminum heating band |
|
——heating power |
3KW×4=12KW |
|
——cooling system |
fan cooling |
|
——cooling power |
0.25KW×3 |
|
——temperature range |
50～300℃ |
|
——Temp. control meter |
Omron Brand |
|
——Screw place |
Zhoushan ,China |
|
5）、Main motor |
|
|
——Power |
55Kw |
|
——Motor type |
Siemens Beide |
|
——Rotate speed |
75～1500 r/min |
|
—— control style |
（ABB）By inverter |
|
——connection with gear box |
by coupler |
|
6）、Gear box |
|
|
—— output torque |
10186 Nm |
|
——material of box |
HT200 Casting |
|
— Teeth clench |
Hard surface clench |
|
——Teeth material |
20CrMnTi |
|
——Teeth surface |
Carburizing+gear grinding |
|
——Shaft material |
40Cr |
|
——Lubricant system |
Oil pool infiltration + forced circulation oil supply lubrication |
|
——cooling of lubricant oil |
Water cooing, cooling device outside gear box |
|
——Seal glue |
Imported brand |
|
7）、connection part to mould |
|
|
——connection |
Flange+screw |
|
8）、Electricity cabinet |
|
|
——Wire |
three-phase, four-wire |
|
——Brand |
Main inverter: ABB Temperature control: Omron Brand Contactor: Siemens Breaker: Siemens Relay: Siemens; Middle relay: Omron |
3. PVC Sheet mould
|
Structure |
cloth hanger |
|
Material |
2Cr13 |
|
Heating method |
Heating plates |
4. Slope Three Rollers calender (Vertical type)
|
1 |
Roller size |
mm |
3×Φ400×1100mm |
|
2 |
Rough of roller surface |
|
Ra≤0.025um |
|
3 |
surface hardness |
|
HRC≥50 |
|
4 |
Depth of chrome plating |
|
≥0.08mm |
|
5 |
transmission |
|
Independent transmission |
|
6 |
Gear and motor |
|
Made in China |
|
7 |
Motor power |
|
3×1.1KW |
|
8 |
Controller |
|
ABB inverter |
|
9 |
Adjustment of roller gap |
|
Mechanical worm adjustment, safety emergency stop switch, synchronous control system |
|
10 |
Bearing |
|
HAERBIN Bearing |
|
11 |
Style |
|
Verticaltype |
5. Mould temperature controller
|
Temperature range |
35－160℃ |
|
Temp Accuracy |
≤±1℃ |
|
Control method |
Independent recycling |
|
Power |
3*12KW |
|
Control valve |
Pneumatic angle seat valve |
6. Cooing bracket and Edge Cutting Unit
|
roller |
Stainless steel roller, polished, U shape end plate fixed, no clings |
|
structure |
Square tube frame segment |
|
length |
8 meters |
|
Blade |
Alloy |
7. Haul off machine
|
Rubber Roller size |
Φ200mmx1100mm |
|
Quantity |
1 pair , upper and lower , synchronous |
|
Driving |
inverter decelerating motor |
|
Motor power |
1.5kw |
|
Press style |
cylinder |
|
Control |
ABB |
8. Single working position winder
|
control |
Tension controller |
|
roller change style |
Manual |
|
Roller diameter |
300-900mm |
|
Max.width of roller |
400mm |
FAQ
Which countries do you mainly export to?
Southeast Asia: Vietnam, Laos, Cambodia.
Africa: Rwanda, Tanzania, Mozambique, Mauritania, Sierra Leone, Guinea, Nigeria.
What is the lead time for mass production?
Typically 15 to 30 days, depending on the quantity and items.
What are your payment terms?
We accept credit cards, wire transfers, and letters of credit.
What is your delivery deadline?
EXW, FOB, CIF, and so on. Other delivery terms are negotiable.
Which transportation methods can I choose?
We typically provide customers with FOB prices in U.S. dollars. Upon customer request, we can also offer door-to-door delivery (shipped to your store address) or CIF prices. The port of shipment is Qingdao, which is a few hours’ drive from our factory.
Product Center