PROFESSIONAL METAL PROCESSING MACHINE MANUFACTTURER
PHONE:
E-Mail:
High Speed Plate Drilling and Milling machine CNC drilling machine PMD SERIES
This High Speed Plate Drilling And Milling Machine is suitable for drilling plate & pipe,baffle and flange in the petrochemical,boiler,refrigeration,wind power flange and other industries.It can also be used in the drilling of connecting plate in the steel structure such as building,bridge,tower and so on.
key word:
Category:
Boiler/Pressure Vessel/Heat Exchanger/Air cooler CNC Drilling Machine
Flange hole Drilling Machine
Larger Steel Plate CNC Drilling Machine
E-mail:
High Speed Plate Drilling and Milling machine CNC drilling machine PMD SERIES
CNC Gantry Movable plate drilling & milling machine cnc drilling machine
Apply scope:
This machine is suitable for drilling plate & pipe,baffle and flange in the petrochemical,boiler,refrigeration,wind power flange and
other industries.It can also be used in the drilling of connecting plate in the steel structure such as building,bridge,tower and so on.
Product structure characteristics:
1.The machine mainly consists of the bed and the longitudinal slide table,gantry and the horizontal slide table,the vertical
sliding pillow drilling power box,the work table,the electric control system,the hydraulic system,the cooling system,the chip
system,the centralized lubrication system and so on.
2.The machine adopts movable gantry and fixed worktable,save the floor area.
3.The machine bed and worktable are independent,which improves the stability of the equipment and effectively reduces the
vibration generated during high-speed drilling.
4.The longitudinal and lateral movements of machine tools are guided by precision roller linear guide,which greatly increases
the rigidity of the equipment.
5.The spindle motor uses a special servo motor to drive the spindle through the synchronous belt, stepless speed regulation,
low speed torque,can withstand heavy cutting load,and can be suitable for high-speed machining of hard alloy tools.
6.The main axis of drilling is Taiwan precision spindle (internal cooling),the main axis cone hole BT50,with a butterfly spring
automatic broaching mechanism,through the rod to install the drill or milling cutter,the hydraulic cylinder loose knife,the replacement
tool is very convenient.
Technical parameters:
|
Model |
PMD3030 |
PMD3030/2 |
PMD4040/2 |
PMD5050/2 |
|
|
Processing size |
L xW |
3000x3000mm |
4000x4000mm |
5000x5000mm |
|
|
Max. thick. |
300mm |
||||
|
Ram type drilling and milling powered head |
Quan. of spindle |
1个 |
2个 |
2个 |
2个 |
|
Spindle taper |
BT50（inner cooling） |
||||
|
Speed of spindle |
120-3200r/min |
||||
|
Stroke of spindle |
500mm |
||||
|
Max. drilling dia. |
¢50mm twist drill /¢40mm hard alloy |
||||
|
Max. tapping dia. |
M32mm |
||||
|
Power of motor of spindle |
18.5 KW /22 KW /30 KW /37KW |
||||
|
Spindle torque |
180/240/360 n≤600r/min |
||||
|
Distance under the shaft |
280-780mm |
||||
|
Gantry longitudinal movement （X-axis） |
Max. stroke |
3000mm |
4000mm |
5000mm |
|
|
X-axis moving speed |
16m/min |
||||
|
Power of X-axis servo motor |
2x3KW |
||||
|
Power head lateral movement（Y-axis） |
Max. stroke |
3000mm |
4000mm |
5000mm |
|
|
Y-axis moving speed |
16 m/min |
||||
|
Power of Y-axis servo motor |
3KW |
2x3KW |
2x3KW |
2x3KW |
|
|
Vertical ram feed motion（Z-axis） |
Max. stroke |
500mm |
|||
|
Z-axis feeding speed |
10 m/min |
||||
|
Power of Z-axis servo motor |
3KW |
2x3KW |
2x3KW |
2x3KW |
|
|
Precision of position |
X.Y axis |
≤0.1mm/全长 |
|||
|
Precision of repeating position |
X.Y axis |
≤0.08mm |
|||
Previous
Radial drilling machine Z3080x25
MESSAGES
CONTACT US
-
Add : Room 520, zhengda times square, 112 jiefang road, lixia district, jinan city, shandong province
Phone : +86-13505310820 -
wechat/whatsapp ID： 0086-13505310820
E-Mail : wensun88@aliyun.com
WEB : www.farincnc.com
Recommended Products / Solution /
Success Case
Webpage Copyright © 2022 Shandong Farin International Trade Co.,ltd
