PROFESSIONAL METAL PROCESSING MACHINE MANUFACTTURER
PHONE:
E-Mail:
Methods to solve the problem of loud noise in CNC PLATE DRILLING MACHINE
Source:
Author:
If the CNC PLATE DRILLING MACHINE makes loud noise during operation, it will have an adverse effect on the working environment and operators. Here are some methods to solve the problem of loud noise.
First, conduct a comprehensive inspection and maintenance of the machine. Make sure that all parts are tightly connected and there is no looseness. Especially for transmission parts, tool fixtures, etc., loose parts will generate vibration and noise during operation. Clean up the debris and dust inside the machine regularly to keep the machine clean to avoid abnormal noise caused by foreign interference.
Check the condition of the tool. Worn or damaged tools may make loud noise when drilling. Replacing the appropriate tool in time to ensure its sharpness and good condition can effectively reduce noise.
It is also very important to optimize the processing parameters. Reasonably adjust parameters such as drilling speed and feed speed to avoid excessive vibration and noise caused by too fast or too strong processing. The most suitable parameter combination can be found through experiments and experience accumulation.
Consider the installation and foundation of the machine. Make sure the machine is installed on a smooth and solid ground, and the installation foundation has sufficient shock-absorbing measures. You can use shock-absorbing pads or install shock-absorbing brackets to reduce the vibration and noise transmitted to the ground when the machine is running.
Check the lubrication of the machine. Good lubrication can reduce friction and wear between parts, thereby reducing noise. Regularly refuel or replace lubricating oil in the parts that need lubrication to maintain the normal operation of the lubrication system.
Improve the sound insulation measures of the CNC PLATE DRILLING MACHINE. Sound insulation boards or sound insulation covers can be installed around the machine to reduce the spread of noise. At the same time, plan the work area reasonably and place the machine in a relatively independent space to reduce the impact on the surrounding environment.
If the noise problem of the CNC PLATE DRILLING MACHINE still exists, it may be necessary to ask professional technicians to conduct in-depth inspection and diagnosis of the machine. They can use professional equipment and technical means to find out the specific causes of the noise and provide targeted solutions.
In daily use, operators should also pay attention to the correct operation methods and maintenance. Operate in strict accordance with the operating procedures to avoid abnormal noise of the machine due to improper operation.
CONTACT US
-
Add : Room 520, zhengda times square, 112 jiefang road, lixia district, jinan city, shandong province
Phone : +86-13505310820 -
wechat/whatsapp ID： 0086-13505310820
E-Mail : wensun88@aliyun.com
WEB : www.farincnc.com
Recommended Products / Solution /
Success Case
Webpage Copyright © 2022 Shandong Farin International Trade Co.,ltd
