PROFESSIONAL METAL PROCESSING MACHINE MANUFACTTURER
PHONE:
E-Mail:
CNC PLATE DRILLING MACHINE operation procedures
Source:
Author:
1. Preparation before starting
Check whether all parts of the machine tool are normal, including the electrical system, transmission system, cooling system, etc.
Clean up the debris on the workbench to ensure that the working area is clean.
Check whether the tool is installed correctly and sharp.
2. Start-up operation
Turn on the power switch and wait for the machine tool to initialize.
Enter the control system and check the machine tool status and parameter settings.
3. Workpiece clamping
According to the shape of the workpiece and processing requirements, select a suitable fixture for clamping to ensure that the workpiece is firm and stable.
Adjust the position of the workpiece so that its relative position with the tool is accurate.
4. Programming and setting
According to the processing drawings, use programming software or manual input to write the processing program.
Set processing parameters such as feed speed, speed, drilling depth, etc.
5. Processing operation
Start the processing program and the machine tool starts to run automatically.
Pay close attention to the processing process and stop the machine in time if there is any abnormality.
During the processing process, you must not leave the machine tool at will.
6. Shutdown operation
After processing, turn off the processing program.
Turn off the power of the machine tool.
Clean the machine tool and the work area and keep them tidy.
7. Precautions
The operator must undergo professional training and be familiar with the performance and operating procedures of the machine tool.
Operate strictly in accordance with the processing procedures and parameters, and do not change them without authorization.
Regularly maintain the machine tool to ensure its stable performance.
Wear protective equipment and pay attention to safety during processing.
The above are the basic operating procedures of CNC PLATE DRILLING MACHINE, which operators should strictly abide by in actual work to ensure processing quality and safety.
CONTACT US
-
Add : Room 520, zhengda times square, 112 jiefang road, lixia district, jinan city, shandong province
Phone : +86-13505310820 -
wechat/whatsapp ID： 0086-13505310820
E-Mail : wensun88@aliyun.com
WEB : www.farincnc.com
Recommended Products / Solution /
Success Case
Webpage Copyright © 2022 Shandong Farin International Trade Co.,ltd
