PROFESSIONAL METAL PROCESSING MACHINE MANUFACTTURER
PHONE:
E-Mail:
Maintenance of CNC PLATE DRILLING MACHINE shutdown
Source:
Author:
There are many types of CNC PLATE DRILLING MACHINE, and each type of CNC PLATE DRILLING MACHINE has different characteristics due to its different functions, structures and systems. The content and rules of its maintenance are also unique. The specific maintenance system should be formulated and established according to the type, model and actual use of the machine tool, and refer to the requirements of the machine tool manual. The following are some common maintenance points.
1. Machine tool cleaning: clean the workpieces, fixtures, iron chips, etc. in the machine tool, and clean the iron chips in the external chip conveyor; wipe the external sheet metal clean, and clean the air conditioner and oil cooler filter of the electric control box.
2. Rust prevention: clean the workbench and apply anti-rust oil; run the machine tool at a slow speed for one hour to lubricate the linear rails; whether the cutting fluid needs to be replaced, give priority to rust prevention, and add cutting fluid when the machine tool starts to work.
3. Cut off the power, gas and fluid supply in the workshop: Run the Y axis of the CNC PLATE DRILLING MACHINE to the middle, return the Z axis to zero, turn off the main power switch of the CNC PLATE DRILLING MACHINE, the transformer inlet switch, the gas source, etc.
4. Waterproof and moisture-proof: Close the electrical box for protection.
5. Rat-proof treatment of machine tools: CNC PLATE DRILLING MACHINE is also rat-proof to prevent rats from biting the wires.
CONTACT US
-
Add : Room 520, zhengda times square, 112 jiefang road, lixia district, jinan city, shandong province
Phone : +86-13505310820 -
wechat/whatsapp ID： 0086-13505310820
E-Mail : wensun88@aliyun.com
WEB : www.farincnc.com
Recommended Products / Solution /
Success Case
Webpage Copyright © 2022 Shandong Farin International Trade Co.,ltd
