Cold Forging Machine

Source:

Author:

Model DBF-104S

4-Station Cold Forging Machine

Main Technical Parameters

ITEM项目	UNIT单位	SPECIFICATIONS
Forging station工位数		4
Forging force压造力	Kgf	80,000
Max. cut-off dia.最大剪断直径	mm	Φ12
Max. cut –off length最大剪断长度	mm	135
Output rate生产速度	pcs/min	90-140
P.K.O stroke 冲具通出行程	mm	30
K.O. stroke打模通出行程	mm	118
Main ram stroke主滑台行程	mm	190
Power of main motor主电机功率	Kw	30
Overall dims. of cut off die剪模外形尺寸	mm	Φ45×59L
Overall dims. of punch die冲具外形尺寸	mm	Φ53×115L
Overall dims. of main die打模外形尺寸	mm	Φ75×135L
Die pitch模具间距	mm	90
Approx. weight机器大约重量	Ton	18
Applicable bolt dia.可制螺丝直径	mm	6-10
Shank length of blank可制丝头下长度	mm	15-110
Overall dimensions占地空间	Mm	740035002800
Remarks: Above mentioned specifications are factory standard data before delivery, but the specifications can be revised as per customer’s requirement after negotiation. 备注：上述规格是出厂前的出厂标准数据，但在协商后可以根据客户要求修改规格。

Main Material and Brand of Standard Configuration

1.Machine body is made of HT300 high quality gray cast iron by Taiwan fund enterprise.

2.Main sliding table is made of QT700 ductile iron cast by Taiwanese fund enterprise.

3.Main crank shaft is made of 42CrMo forging alloy steel after Nitriding Treatment.

4.All cams, rolling wheels and slide gibs are made of material SKD-11 high carbon and high chromium alloy tool steel after whole body vacuum hardening.

5.Gripping plate is made of aero hard aluminum after hard anodizing treatment .

6.Main die holder is made of 42CrMo forging alloy steel.

7.Wearing work piece all are made of material 38CrMoAI alloy structural steel after hard Nitriding Treatment.

8.All copper sleeves and brasses of the machine are made of PBC-2 .

9.The bottom of front and back wing of main sliding table is adopted super wearing graphite inserted PBC-2 copper plate with self lubrication

10.Non-Oil self-lubricating bearings are qualified to improve the application life and abrasion resistance of the coupling shaft as well as reduce energy consumption

11.Air clutch is adopted famous international product.

12.Adopting Schneider converter.

13.Adopting Japan Mitsubishi PLC.

14.Adopting Japan NSK and IKO bearing.

15.Lubricating pump, cooling pump are made by TSWU KWAN from Taiwan.